Setting Powder

Powered by EnviroScreen™ Technology, this all-powerful, all-mineral skin shield provides total protection in one convenient, on-the-go application—alone or over makeup.

Broad Spectrum (UVA/UVB) Sunscreen
UVA protection rating: PA++++
UVB protection rating: SPF 50
Water resistant (80 minutes)

Net Wt. 0.21 oz. / 6 g
90-day supply based on typical use

• VIDEO
• HOW TO USE
• INGREDIENTS

•  

  1. OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Replace cap.

  2. ACTIVATE: With the cap still on, hold the brush with cap facing down and tap several times into the palm of your hand. Then sweep the brush in small circular motions using moderate pressure on the back of your hand. Repeat as needed until powder flows consistently. Repeat activation before and during each use to maintain consistent powder flow and ensure even application.

  3. APPLY: Using circular motions, sweep directly onto bare skin or over makeup. Apply generously across your face, ears and neck. Two complete passes over the face are recommended to ensure full coverage. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.

• Active Ingredients:
  Titanium Dioxide 22.5%; Zinc Oxide 22.5%

  Inactive Ingredients:
  Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).

Stay radiant every day without damaging your skin with our SPF 30 natural sunscreen. Colorescience® Brush-On Sunscreen offers powerful SPF 30 UVA/UVB protection, alone or over makeup. Sheer, natural-looking coverage and SPF 30 sun protection in one simple, on-the-go application.

Broad Spectrum SPF 30 Sunscreen
Water resistant (80 minutes)

Net Wt. 6 g / 0.21 oz
90-day supply based on typical use

• VIDEO
• HOW TO USE
• INGREDIENTS

• Sweep brush over face and body to release powder. Use small circular strokes to release more powder for more coverage. Apply liberally and evenly before sun exposure; Reapply at least every two hours, and use a water resistant sunscreen if swimming or sweating. Apply over Daily UV Protector SPF 30 Sunscreen for best results. Children under 6 months of age, ask a doctor.

  Sun Protection Measures: Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad-Spectrum SPF value of 15 or higher and other sun protection measures including: Limit time in the sun, from 10 am - 2 pm and wear long-sleeved shirts, pants, hats, and sunglasses.

   

  WARNING: For external use only. When using this product, keep out of eyes. Rinse with water to remove. If any adverse reaction occurs, stop using the product. Inform your doctor if your condition persists. Stop use and ask a doctor if rash or irritation occurs. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away.

• Gluten-free: Yes
  Paraben-free: Yes
  Unscented: Yes

  Shades: Fair, Medium, Medium Shimmer

  Active Ingredients:
  Titanium Dioxide 21%; Zinc Oxide 11.8%

  Inactive Ingredients:

  Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Lithothamnion Calcareum Extract, Mannitol, Methicone, Dimethicone, Laureth-4, Calcium Silicate, Triethoxycaprylylsilane, Diatomaceous Earth, Sodium Sulfate, Zinc Sulfate, Iron Oxides (CI 77491, CI 77492, CI 77499)

  Shade: Tan

  Active Ingredients:
  Titanium Dioxide 21%; Zinc Oxide 11.8%

  Inactive Ingredients:

  Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Lithothamnion Calcareum Extract, Mannitol, Methicone, Dimethicone, Laureth-4, Calcium Silicate, Triethoxycaprylylsilane, Diatomaceous Earth, Sodium Sulfate, Zinc Sulfate, Iron Oxides (CI 77491, CI 77492, CI 77499)

  Shade: Deep

  Active Ingredients:
  Titanium Dioxide 21%; Zinc Oxide 11.8%

  Inactive Ingredients:

   

  Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Lithothamnion Calcareum Extract, Mannitol, Methicone, Dimethicone, Laureth-4, Calcium Silicate, Triethoxycaprylylsilane, Diatomaceous Earth, Sodium Sulfate, Zinc Sulfate, Iron Oxides (CI 77491, CI 77492, CI 77499)

Imperfections? Blemishes? Dark spots? Camouflage, conceal, protect and brighten with Colorescience® Mineral Corrector Palette. A makeup artist's essential mineral makeup palette, our colour correcting palette casts a spell on any imperfection with our five available skin-neutralizing shades and the confidence of SPF 20 protection.

Net Wt. 12 g / 0.42 oz

4 Minutes to Flawless™: Achieve a flawless look when using our Mineral Corrector Palette SPF 20 in conjunction with our Skin Perfectors, foundations and Sunforgettable® Brush-on Sunscreen; all part of our 4 Minutes to Flawless™ cosmetic and skin care line of products.

• VIDEO
• HOW TO USE
• INGREDIENTS

• Shade one lightens red tones, shade two corrects red tones, shade three corrects blue and covers brown, shade four corrects dark blue and shade five corrects yellow.

  Try each shade alone or blend to find best coverage based on your skin tone. For best results, layer over colorescience® Skin Perfector or Foundation with a patting motion to press product onto skin. Continue layering until desired coverage is achieved.

  HELPFUL TIP: You can use this versatile palette a million ways: Neutral eye shadow base, correct dark spots, cover blemishes and many, many more! See video for how to use this versatile product!

  " This palette is ALWAYS in my kit. I will not work without it."

  -Award winning makeup artist Tracey Anderson (Sons of Anarchy)

• Gluten-free: Yes
  Paraben-free: Yes
  Unscented: No

  Active Ingredients:
  Titanium Dioxide 21.2%; Zinc Oxide 12.1%

  Inactive Ingredients:
  Mica, Ethylhexyl Hydroxystearate Benzoate, Tocopheryl Acetate, Daucus Carota Sativa (Carrot) Seed Oil, Glycerin, Methicone, Dimethicone, Triethoxycaprylylsilane, Lycopodium Clavatum Extract, Imperata Cylindrica Root Extract, Lauroyl Lysine, Silica, Pelargonium Graveolens Flower Oil, Cananga Odorata Flower Oil, Fusanus Spicatus Wood Oil, Phenethyl Alcohol, Sodium Dehydroacetate, Caprylyl Glycol, Phenoxyethanol, Potassium Sorbate, Benzyl Benzoate, Farnesol, Linalool, Bismuth Oxychloride (CI 77163), Chromium Oxide Greens (CI 77288), Iron Oxides (CI 77491, CI 77492, CI 77499)

Brighten your complexion and diffuse imperfections with Colorescience® Pressed Mineral Illuminator. Light reflective pigments in our patented mineral illuminator to provide sheer luminosity for stunning results.

Net Wt. 4 g / 0.14 oz 

• VIDEO
• HOW TO USE
• INGREDIENTS

•  

  Sweep brush over cheeks, nose, forehead or décolleté to achieve the perfect look.

  HELPFUL TIP: An illuminator is NOT a foundation, avoid covering your whole face. It's blenddable and should be applied on top of foundation, blush or bronzer.

• Gluten-free: Yes
  Paraben-free: Yes
  Unscented: No
  
  Ingredients:

  Synthetic Fluorphlogopite, PTFE, Mica, Diisotearyl Malate, Cyclopentasiloxane, Boron Nitride, Lauroyl Lysine, Dimethicone, Pearl Powder, Triethoxycaprylylsilane, Fusanus Spicatus Wood Oil, Cananga Odorata Flower Oil, Pelagonium Graveolens Flower Oil, Methicone, Water (Aqua), Phenethyl Alcohol, Caprylyl Glycol, Phenoxyethanol, Hexylene Glycol, Alumina, Tin Oxide, Benzyl Alcohol, Benzyl Salicylate, Benzyl Benzoate, Citronellol, Farnesol, Geraniol, Linalool, Bismuth Oxychloride (CI 77163), Carmine (CI 75470), Iron Oxide (CI 77491), Titanium Dioxide (CI 77891), Zinc Oxide (CI 77947) Contains carmine as a color additive.