Sunforgettable Total Protection Brush-On Shield Bronze SPF 50

Sunforgettable Total Protection Brush-On Shield Bronze SPF 50

  • Sunforgettable Total Protection Brush-On Shield Bronze SPF 50 - Colorescience UK
  • Bronze_Model photo
  • Bronze_Model photo 2
  • Set Sunforgettable Total Protection Brush-On Shield Bronze with SPF 50 Lifestyle - Colorescience UK
1 4
How To Apply

How to activate your Brush-on Shield:

  1. Pop: open the cap.
  2. Push: plastic sleeve down
  3. Pull: off rubber band and pull sleeve up again.
  4. Cap: the top back on
  5. Tap: 3-5 times on a hard surface with cap side down. Put some power behind those taps! Repeat as needed
  6. Flick + apply: open brush again, pull down sleeve, flick bristles to ensure powder is flowing, and apply!
  7. Tap, flick + apply: before each use, tap the brush with cap side down a few times, then flick the bristles with your finger to see the powder is flowing. Use small circular motions to sweep the brush onto dry bare skin, moisturized skin, or over makeup. Apply generously on face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application.
Ingredients

Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%

Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).

FAQs
What is EnviroScreen® Technology?

EnviroScreen® Technology is proprietary to Colorescience. EnviroScreen® Technology uses patented active ingredients, Zinc Oxide and Titanium Dioxide, which create a barrier preventing free radical formation and oxidative stress. These patented actives are combined with specialty ingredients that, together, work synergistically to protect skin from damage caused by exposure to UVA/UVB rays, pollution, blue light (also known as High Energy Visible, or HEV, light), and infrared radiation.

What is a mineral based UV protector?

The active ingredients in a mineral based powder sunscreen, or a cream, are what makes them different to the regular old types of chemical-based sunscreens. We will go over some more of the specifics next, but for now there is one main difference to remember. In basic terms, a mineral-based UV protector uses active ingredients that physically block UV rays, reflecting them away from you, and preventing them from penetrating your skin.

Do chemical-free sunscreens offer protection against both UVA and UVB rays?

Yes, chemical-free sunscreens provide protection against both UVA and UVB rays. Ingredients like zinc oxide and titanium dioxide work by forming a physical barrier on the skin’s surface, effectively reflecting and scattering harmful rays before they can penetrate the skin. Our range of all-mineral sunscreens provide broad-spectrum protection against UVA, UVB, blue light and infrared radiation.

Which sunscreen ingredients are considered safe during pregnancy?

During pregnancy, it’s recommended to use mineral-based sunscreens containing zinc oxide and titanium dioxide. These all-mineral formulations are gentle on sensitive skin, providing broad-spectrum protection without the potential risks associated with chemical sunscreens.

Sunforgettable Total Protection Brush-On Shield Bronze SPF 50

Sunforgettable Total Protection Brush-On Shield Bronze SPF 50

Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive... Read More

Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection from environmental aggressors such as UVA/UVB, pollution, blue light, and infrared radiation.

Patented ingredients and an antioxidant-rich mineral powder protect against free radicals that contribute to skin damage while hyaluronic acid hydrates for supple skin. Environmental protection and an effortlessly healthy, bronzed radiance on the go.

  • Broad Spectrum (UVA/UVB) Sunscreen
  • UVA protection rating: PA++++
  • UVB protection rating: SPF 50
  • Water-resistant (80 minutes)

Net Wt. 0.21 oz. / 6 g
90-day supply based on typical use

Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection... Read more

£50.00 GBP
£50.00 GBP
View full details
Natural ingredients
Never tested on animals
Free shipping over £80
30 day returns**
How To Apply

How to activate your Brush-on Shield:

  1. Pop: open the cap.
  2. Push: plastic sleeve down
  3. Pull: off rubber band and pull sleeve up again.
  4. Cap: the top back on
  5. Tap: 3-5 times on a hard surface with cap side down. Put some power behind those taps! Repeat as needed
  6. Flick + apply: open brush again, pull down sleeve, flick bristles to ensure powder is flowing, and apply!
  7. Tap, flick + apply: before each use, tap the brush with cap side down a few times, then flick the bristles with your finger to see the powder is flowing. Use small circular motions to sweep the brush onto dry bare skin, moisturized skin, or over makeup. Apply generously on face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application.
Ingredients

Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%

Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).

FAQs
What is EnviroScreen® Technology?

EnviroScreen® Technology is proprietary to Colorescience. EnviroScreen® Technology uses patented active ingredients, Zinc Oxide and Titanium Dioxide, which create a barrier preventing free radical formation and oxidative stress. These patented actives are combined with specialty ingredients that, together, work synergistically to protect skin from damage caused by exposure to UVA/UVB rays, pollution, blue light (also known as High Energy Visible, or HEV, light), and infrared radiation.

What is a mineral based UV protector?

The active ingredients in a mineral based powder sunscreen, or a cream, are what makes them different to the regular old types of chemical-based sunscreens. We will go over some more of the specifics next, but for now there is one main difference to remember. In basic terms, a mineral-based UV protector uses active ingredients that physically block UV rays, reflecting them away from you, and preventing them from penetrating your skin.

Do chemical-free sunscreens offer protection against both UVA and UVB rays?

Yes, chemical-free sunscreens provide protection against both UVA and UVB rays. Ingredients like zinc oxide and titanium dioxide work by forming a physical barrier on the skin’s surface, effectively reflecting and scattering harmful rays before they can penetrate the skin. Our range of all-mineral sunscreens provide broad-spectrum protection against UVA, UVB, blue light and infrared radiation.

Which sunscreen ingredients are considered safe during pregnancy?

During pregnancy, it’s recommended to use mineral-based sunscreens containing zinc oxide and titanium dioxide. These all-mineral formulations are gentle on sensitive skin, providing broad-spectrum protection without the potential risks associated with chemical sunscreens.