4.6 / 5.0
5 Reviews 5 total reviews
How To Apply
How to activate your Brush-on Shield:
- Pop: open the cap.
- Push: plastic sleeve down
- Pull: off rubber band and pull sleeve up again.
- Cap: the top back on
- Tap: 3-5 times on a hard surface with cap side down. Put some power behind those taps! Repeat as needed
- Flick + apply: open brush again, pull down sleeve, flick bristles to ensure powder is flowing, and apply!
- Tap, flick + apply: before each use, tap the brush with cap side down a few times, then flick the bristles with your finger to see the powder is flowing. Use small circular motions to sweep the brush onto dry bare skin, moisturized skin, or over makeup. Apply generously on face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application.
Ingredients
Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%
Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).
FAQs
Are Mineral UV Protectors better than chemical?
Yes, most dermatologists agree that using a mineral-based formulation, whether it is a powder sunscreen or a cream, is better than the traditional chemical-based alternative.
Do chemical-free sunscreens offer protection against both UVA and UVB rays?
Yes, chemical-free sunscreens provide protection against both UVA and UVB rays. Ingredients like zinc oxide and titanium dioxide work by forming a physical barrier on the skin’s surface, effectively reflecting and scattering harmful rays before they can penetrate the skin. Our range of all-mineral sunscreens provide broad-spectrum protection against UVA, UVB, blue light and infrared radiation.
Why is mineral makeup good for your skin?
You're getting the protection from sun damage from the minerals, which will help to stop premature skin ageing as we discussed earlier, and there are numerous other natural and healthy ingredients in there. But we're not finished just yet – there are a few more healthy reasons why you should add mineral face makeup to your daily routine.
The mineral makeup palettes and products you see here at Colorescience are non-comedogenic, which means they allow your pores to breathe without blocking them up. This is great for anyone with acne-prone or sensitive skin, but it's also great for everyone else because nobody wants suffocated pores.
Another benefit is that the ingredients used are so natural and gentle that they can be used on just about any type of skin, including broken skin and rosacea, and even post-procedure skin.
In fact, most dermatologists recommend this type of product for use after peels and other procedures because they are so confident that it will be gentler than traditional types of makeup and skincare that have been around in the past.
What is mineral makeup?
It's just what you would expect from any other type of makeup, except it leaves out those risky chemicals and filler agents that are commonly found in traditional makeup. Did you know that a lot of that old kind of makeup has talc in it just to make it look like you're getting more for your money? We don't do that here. What you see is what you get, and that means that mineral makeup is so powerful and so concentrated that you don't need to use as much of it.
So, the basic difference between mineral makeup and the traditional kind is that it leaves out bad ingredients, but it also replaces them with great ingredients. For example, zinc oxide and titanium dioxide are two mineral ingredients used in most of our formulations and that gives Colorescience products a healthy dose of UV protection. This is important because sun exposure causes premature skin ageing, and these minerals help stop that.
Our products are also packed with many other healthy and natural ingredients such as botanical extracts which help to nourish the skin and protect it over time through continued use. It's never too late to see the benefits from switching to a mineral sunblock or something else from your routine.
Is Colorescience makeup cruelty-free?
Yes, all Colorescience products, including our SPF makeup, are 100% cruelty-free.
4.6 / 5.0
5 Reviews 5 total reviews
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive...
Read more
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection from environmental aggressors such as UVA/UVB, pollution, blue light, and infrared radiation.
Patented ingredients and an antioxidant-rich mineral powder protect against free radicals that contribute to skin damage while hyaluronic acid hydrates for supple skin. Environmental protection and an effortlessly healthy, bronzed radiance on the go.
- Broad Spectrum (UVA/UVB) Sunscreen
- UVA protection rating: PA++++
- UVB protection rating: SPF 50
- Water-resistant (80 minutes)
Net Wt. 0.21 oz. / 6 g
90-day supply based on typical use
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection...
Read more
Regular price
£50.00 GBP
Sale price
£50.00 GBP
Regular price
Unit price
/
per
Couldn't load pickup availability
Natural ingredients
Never tested on animals
Free shipping over £80
30 day returns**
How To Apply
How to activate your Brush-on Shield:
- Pop: open the cap.
- Push: plastic sleeve down
- Pull: off rubber band and pull sleeve up again.
- Cap: the top back on
- Tap: 3-5 times on a hard surface with cap side down. Put some power behind those taps! Repeat as needed
- Flick + apply: open brush again, pull down sleeve, flick bristles to ensure powder is flowing, and apply!
- Tap, flick + apply: before each use, tap the brush with cap side down a few times, then flick the bristles with your finger to see the powder is flowing. Use small circular motions to sweep the brush onto dry bare skin, moisturized skin, or over makeup. Apply generously on face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application.
Ingredients
Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%
Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).
FAQs
Are Mineral UV Protectors better than chemical?
Yes, most dermatologists agree that using a mineral-based formulation, whether it is a powder sunscreen or a cream, is better than the traditional chemical-based alternative.
Do chemical-free sunscreens offer protection against both UVA and UVB rays?
Yes, chemical-free sunscreens provide protection against both UVA and UVB rays. Ingredients like zinc oxide and titanium dioxide work by forming a physical barrier on the skin’s surface, effectively reflecting and scattering harmful rays before they can penetrate the skin. Our range of all-mineral sunscreens provide broad-spectrum protection against UVA, UVB, blue light and infrared radiation.
Why is mineral makeup good for your skin?
You're getting the protection from sun damage from the minerals, which will help to stop premature skin ageing as we discussed earlier, and there are numerous other natural and healthy ingredients in there. But we're not finished just yet – there are a few more healthy reasons why you should add mineral face makeup to your daily routine.
The mineral makeup palettes and products you see here at Colorescience are non-comedogenic, which means they allow your pores to breathe without blocking them up. This is great for anyone with acne-prone or sensitive skin, but it's also great for everyone else because nobody wants suffocated pores.
Another benefit is that the ingredients used are so natural and gentle that they can be used on just about any type of skin, including broken skin and rosacea, and even post-procedure skin.
In fact, most dermatologists recommend this type of product for use after peels and other procedures because they are so confident that it will be gentler than traditional types of makeup and skincare that have been around in the past.
What is mineral makeup?
It's just what you would expect from any other type of makeup, except it leaves out those risky chemicals and filler agents that are commonly found in traditional makeup. Did you know that a lot of that old kind of makeup has talc in it just to make it look like you're getting more for your money? We don't do that here. What you see is what you get, and that means that mineral makeup is so powerful and so concentrated that you don't need to use as much of it.
So, the basic difference between mineral makeup and the traditional kind is that it leaves out bad ingredients, but it also replaces them with great ingredients. For example, zinc oxide and titanium dioxide are two mineral ingredients used in most of our formulations and that gives Colorescience products a healthy dose of UV protection. This is important because sun exposure causes premature skin ageing, and these minerals help stop that.
Our products are also packed with many other healthy and natural ingredients such as botanical extracts which help to nourish the skin and protect it over time through continued use. It's never too late to see the benefits from switching to a mineral sunblock or something else from your routine.
Is Colorescience makeup cruelty-free?
Yes, all Colorescience products, including our SPF makeup, are 100% cruelty-free.
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive... Read more
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection from environmental aggressors such as UVA/UVB, pollution, blue light, and infrared radiation.
Patented ingredients and an antioxidant-rich mineral powder protect against free radicals that contribute to skin damage while hyaluronic acid hydrates for supple skin. Environmental protection and an effortlessly healthy, bronzed radiance on the go.
- Broad Spectrum (UVA/UVB) Sunscreen
- UVA protection rating: PA++++
- UVB protection rating: SPF 50
- Water-resistant (80 minutes)
Net Wt. 0.21 oz. / 6 g
90-day supply based on typical use
Brush-on Total Protection™ and natural sun-kissed bronze. Add all-over warmth to your complexion or create depth and contour while protecting and nourishing the skin. Exclusive EnviroScreen® Technology provides protection... Read more
Couldn't load pickup availability
How To Apply
How to activate your Brush-on Shield:
- Pop: open the cap.
- Push: plastic sleeve down
- Pull: off rubber band and pull sleeve up again.
- Cap: the top back on
- Tap: 3-5 times on a hard surface with cap side down. Put some power behind those taps! Repeat as needed
- Flick + apply: open brush again, pull down sleeve, flick bristles to ensure powder is flowing, and apply!
- Tap, flick + apply: before each use, tap the brush with cap side down a few times, then flick the bristles with your finger to see the powder is flowing. Use small circular motions to sweep the brush onto dry bare skin, moisturized skin, or over makeup. Apply generously on face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application.
Ingredients
Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%
Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).
FAQs
Are Mineral UV Protectors better than chemical?
Yes, most dermatologists agree that using a mineral-based formulation, whether it is a powder sunscreen or a cream, is better than the traditional chemical-based alternative.
Do chemical-free sunscreens offer protection against both UVA and UVB rays?
Yes, chemical-free sunscreens provide protection against both UVA and UVB rays. Ingredients like zinc oxide and titanium dioxide work by forming a physical barrier on the skin’s surface, effectively reflecting and scattering harmful rays before they can penetrate the skin. Our range of all-mineral sunscreens provide broad-spectrum protection against UVA, UVB, blue light and infrared radiation.
Why is mineral makeup good for your skin?
You're getting the protection from sun damage from the minerals, which will help to stop premature skin ageing as we discussed earlier, and there are numerous other natural and healthy ingredients in there. But we're not finished just yet – there are a few more healthy reasons why you should add mineral face makeup to your daily routine.
The mineral makeup palettes and products you see here at Colorescience are non-comedogenic, which means they allow your pores to breathe without blocking them up. This is great for anyone with acne-prone or sensitive skin, but it's also great for everyone else because nobody wants suffocated pores.
Another benefit is that the ingredients used are so natural and gentle that they can be used on just about any type of skin, including broken skin and rosacea, and even post-procedure skin.
In fact, most dermatologists recommend this type of product for use after peels and other procedures because they are so confident that it will be gentler than traditional types of makeup and skincare that have been around in the past.
What is mineral makeup?
It's just what you would expect from any other type of makeup, except it leaves out those risky chemicals and filler agents that are commonly found in traditional makeup. Did you know that a lot of that old kind of makeup has talc in it just to make it look like you're getting more for your money? We don't do that here. What you see is what you get, and that means that mineral makeup is so powerful and so concentrated that you don't need to use as much of it.
So, the basic difference between mineral makeup and the traditional kind is that it leaves out bad ingredients, but it also replaces them with great ingredients. For example, zinc oxide and titanium dioxide are two mineral ingredients used in most of our formulations and that gives Colorescience products a healthy dose of UV protection. This is important because sun exposure causes premature skin ageing, and these minerals help stop that.
Our products are also packed with many other healthy and natural ingredients such as botanical extracts which help to nourish the skin and protect it over time through continued use. It's never too late to see the benefits from switching to a mineral sunblock or something else from your routine.
Is Colorescience makeup cruelty-free?
Yes, all Colorescience products, including our SPF makeup, are 100% cruelty-free.




- Choosing a selection results in a full page refresh.
- Opens in a new window.